Saving And Recalling States And Traces - HP 3563A Operating Manual

Display Configuration

Saving and Recalling States and Traces

Saving and Reca l l i ng States and Traces
The HP 3563A can save up to five instrument states and five data traces in its internal, non-volatile
memory. (Refer to chapter 11 for saving states and traces in disc memory.) The current state is
stored in non-volatile memory at power-down and may be recalled later.
When you save an instrument state, only the information in the instrument state display is saved.
Coordinates, for example, are not saved. A triangle preceding the measurement display name
indicates that the trace has been recalled from memory.
When you store a trace, the analyzer stores all information needed to recreate the trace. When you
recall a trace, the trace is displayed without changing the configuration of the analyzer. If you want
to recall a trace and reconfigure the analyzer
state information with the trace. Time buffer and demod preview displays cannot be saved in local
memory.
Use the SAVE RECALL hardkey to save and recall instrument states and traces. When you press
SAVE RECALL, the menu in figure 8-11 appears.
8-32
as
it was when you saved the trace, you must save the
SAVE
RECAll
RECAll
PWR
O N
D
RECAll �
STA TE.'
SAVE
STA TE.
D
RECAll
•
DAT A
SAVE
DATAn ,
D
Figure 8-1 1. SAVE RECALL Menu Diagram
)
j
.