Chapter 11: Disc/Plotter/Hp·ib Operations - HP 3563A Operating Manual

The softkeys that appear when you press HP-IS FeTN do the following:
SYSTEM
CNTRLR
ADORES
ONLY
SELECT
ADORES
USER
SRQ
OUTPUT
STRING
ABORT
HP·IB
The SELECT ADORES Menu
The SELECT ADORES softkey allows you to set the HP 3563A's address and enter the addresses of
plotters and disc drives. The softkeys that appear when you press this softkey do the following:
Hp·IS
ADORES
PLOT
ADORES
DISC
ADORES
DISC
UNIT
Identifies the HP 3563A as the system controller. This is necessary for
plotting, accessing discs and outputting command strings.
Identifies the HP 3563A as an addressable-only bus device. This is
necessary for programming the instrument over the HP-lB with an
external controller.
Displays the select address menu, which is used to set the HP 3563A's
address and enter the addresses of plotters and disc drives. See "The
SELECf ADDRES Menu".
Displays the user service request menu, which allows you to send eight
unique service requests to an external controller. See "The USER
SRQ Menu".
Allows you to output command strings to the HP-lB. See "Outputting
Command Strings" later in this chapter.
Aborts HP-IB operations.
Used to view and set the HP-IS address of the HP 3563A, from 0 to 31.
The value you enter is saved in non-volatile
Used to enter the plotter's address, from 0 to 31. The HP 3563A needs
to know the plotter's address to communicate with it. The value you
enter is saved in non-volatile
Used to enter the disc drive's address, from 0 to 7. The HP 3563A
needs to know the drive's address to communicate with it. The value
is
you enter saved in non-volatile
Used to enter the unit number on multiple-unit disc drives, from 0 to
15. This does not actually set it on the drive, but the HP 3563A needs
to know the drive unit number to access the desired disc. The value you
is
enter saved in non-volatile RAM.
Disc/Plotter/HP·IB Operations
The Hp·IB Function Menu
RAM
.
RAM
.
RAM
.
1 1 -3