Water Connection - Champion M4.2 Series Installation/Operation Manual With Service Replacement Parts

Water Connection

THE MODEL UH330 ADA REQUIRES A SINGLE 1/2"
INCOMING COLD WATER SUPPLY LINE
Model UH330 ADA
1. Equipped with a 6 ft. flexible cold water fill hose with a 3/4" female garden hose connector.
2. A 1/2" or larger main incoming supply line must be installed to the dishwasher.
3. We recommend that a 1/2" or larger shut-off valve be installed in the main water supply,
as close to the dishwasher as possible for servicing.
4. The UH330 ADA has a built-in flow control. The flowing incoming cold water supply pressure
must be between 25-95 psi.
5. A water hardness of 3 grains/gal (US) [51.3 mg/L] or less is recommended.
42-3/8" [1076mm]
Side View
! ATTENTION!
CW
CW = 1/2" Cold Water Supply
55-80°F/12-26°C
CW
Plan View
Installation
26-3/4"
[679mm]
9