Drain Connection - Champion M4.2 Series Installation/Operation Manual With Service Replacement Parts

Installation

Drain Connection

IMPROPER INSTALLATION OF MACHINE DRAIN HOSE.
Machine drain problems are often the result of improper installation and may not
Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.
Make sure that the flexible water supply and drain hoses are not kinked.
1. The UH330 ADA is a pumped drain and is equipped with a 6 ft.. 5/8" I.D. drain
hose. The maximum drain height connection must not exceed 3 ft.[1 m].
2. The drain hose is located at the rear of the dishwasher, and is secured to the rear of
the machine provide an anti-siphoning loop in the drain hose.
3. A 3/4" hose barb fitting is strapped to the drain hose prior to shipment.
The service part number for the hose barb is P/N 0512321.
4. Additional plumbing parts must be supplied by the plumbing installer.
5. The maximum drain flow is 15 US gpm/12.4 imp gpm/60 lpm.
42-3/8" [1076mm]
10
! VERY IMPORTANT !
be covered by the limited warranty.
! VERY IMPORTANT !
! IMPORTANT !
DH
Side View
DH = Drain Hose
5/8" I.D., 6 ft [1829 mm] Long
DH
26-3/4"
[679mm]
Plan View