Connecting Incoming Power To The Main Terminal Block 1Ph And 3Ph - Champion M4.2 Series Installation/Operation Manual With Service Replacement Parts

Connecting Incoming Power to the Main Terminal Block
for 1PH and 3PH Machines with Boosters
PROVIDE A 3 FEET/1 METER SERVICE LOOP IN THE POWER SUPPLY
CABLE TO SERVICE THE DISHWASHER.
! SINGLE PHASE POWER REQUIREMENT !
SINGLE PHASE UH330 ADA
The electrical power must be a 3-wire plus ground supply which
! THREE PHASE POWER REQUIREMENT !
THREE PHASE UH330 ADA
The electrical power must be a 4-wire plus ground supply which
WARNING:
Electrocution or serious injury may result when working on an
energized circuit.
Disconnect power at the main breaker or service disconnect switch
before working on the circuit.
Lock-out and tag the breaker or service disconnect switch to
indicate that work is being performed on the circuit.
! VERY IMPORTANT !
includes a current carrying neutral.
includes a current carrying neutral.
Installation
3