Completing The 1Ph To 3Ph Electrical Conversion - Champion M4.2 Series Installation/Operation Manual With Service Replacement Parts

Installation

Completing the 1PH to 3PH Electrical Conversion

CHANGE THE DATA PLATE ON THE LOWER FRONT PANEL OF THE MACHINE
AFTER THE MACHINE IS WIRED FOR 3PH AND THE BOOSTER HEATER IS CONNECTED
1. The data plate on the dishwasher lower front panel must be changed after the
machine is converted from single phase operation to three phase operation.
2. Locate the replacement data plate stowed on the back of the lower front panel.
3. Remove the paper backing from the label and carefully place it over the existing
data plate label making sure it covers the label completely.
4 Re-install the lower front panel to complete the conversion.
8
! ATTENTION !
FOR 3PH.
A three phase data plate is located on the back of the lower front panel.