Table of Contents
Advertisement
Chapter 3: Installing the Chassis in an Equipment Rack
Required Tools and Material
78
Here is a list of the tools and material you need to install the product:
#2 Phillips-head screwdriver
Crimping tool
Eight equipment rack screws
One 10 AWG stranded grounding wire
#2 Phillips-head 5 inch-lbs torque screwdriver (optional)
#2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack. E30
If you purchased the AT-SBxPWRSYS1 DC Power Supply, you also need
these items:
Two 8 AWG power wires
One 10 AWG grounding wire
8 mm wrench
#1 Phillips-head screwdriver
#3 Phillips-head screwdriver
#3 Phillips-head 30 to 40 inch-lbs torque screwdriver (optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
Advertisement
Table of Contents
