Figure 130: Tightening The Handle Locking Screw - Allied Telesis SwitchBlade x3112 Installation Manual

Figure 130. Tightening the Handle Locking Screw
8. Before attaching the power wires from the power supply to the circuit
breaker in the wiring closet, check that the circuit breaker is off.
9. Connect the power wires to the circuit breaker.
10. Turn the circuit breaker on.
11. Turn the On/Off switch on the power supply to the On position. See
Figure 131 on page 174.
Download from Www.Somanuals.com. All Manuals Search And Download.
SwitchBlade x3112 Installation Guide
Handle locking
screw
173