Table of Contents
Advertisement
Figure 82. Tightening the Thumbscrews on a Blank Slot Cover
3. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the blank slot cover to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
4. Repeat this procedure to cover the remaining empty slots with blank
slot covers.
5. Store any unused blank panels in a secure place for future use.
6. Go to Chapter 6, "Installing the Transceivers and Cabling the Ports" on
page 127.
Download from Www.Somanuals.com. All Manuals Search And Download.
SwitchBlade x3112 Installation Guide
125
Advertisement
Table of Contents
