Table of Contents
Advertisement
LED
PSU
FAN
SBx STATUS
The SBx STATUS LEDs display general status information about the
Ethernet line cards and control cards. There is one LED for each slot. If the
LEDs
chassis has two control cards, the SBx Status LEDs on both cards are
active. The states of the LEDs are defined in Table 13.
LEDs
0 to 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 12. SYS (System) Status LEDs (Continued)
State
Solid Green
Indicates that the power supplies are operating
properly.
Flashing
Indicates that a power supply is experiencing a
Amber
problem. Possible causes are:
The input AC voltage from a power source is
not within the normal operating range of a
power supply module.
The output DC voltage from a power supply
module to the line cards is not within the
normal operating range.
A power supply is experiencing high
temperature.
A power supply has failed.
Check the status LEDs on the individual power
supply modules to determine which module has a
fault condition.
Solid Green
Indicates that the fan module is operating
properly.
Flashing
Indicates that the fan module has a problem. One
Amber
or more of the fans is operating below the normal
operating range or has stopped.
Table 13. SBx STATUS LEDs
State
Off
Indicates that the slot is empty.
Solid Green
Indicates that the Ethernet line or control
card is operating normally.
Flashing Green
Indicates that the card is booting up, in test
mode, or loading the configuration settings.
SwitchBlade x3112 Installation Guide
Description
Description
55
Advertisement
Table of Contents
