Mitsubishi Electric 800 Series Instruction Manual page 22

NOTE
Crimp terminal commercially available (as of April 2023. The product may be changed without notice.)
Wire gauge
Terminal
2
screw size
(mm )
0.3
M2
0.5
2.
Loosen the terminal screw and insert the cable into the terminal.
Tighten each cable with fixing screws to the recommended tightening torque.
<Cable connection example>
Screw size
M2 0.22 N•m to 0.25 N•m
NOTE
• Under-tightening may cause cable disconnection or malfunction. Over-tightening may cause a short circuit or malfunction
due to damage to the screw or option unit.
Ferrule part No.
with insulation sleeve
AI 0,34-6TQ
Al 0,5-6WH
D+ D-
V-
Tightening torque
0.3 mm
without insulation sleeve
A 0,34-7
A 0,5-6
<Connection example of multiple inverters>
To next inverter
D+ D-
D+ D-
V-
To master
Wire gauge
Small flathead screwdriver
2 2
to 0.75 mm
(Tip thickness: 0.4 mm /tip width: 2.5 mm)
Crimping tool
Manufacturer
model No.
Phoenix Contact
CRIMPFOX 6
Co., Ltd.
V-
Screwdriver
WIRING
3
21