Mitsubishi Electric 800 Series Instruction Manual page 79

NOTE
• When Pr.541 = "1" (with sign)
The set frequency cannot be written in EEPROM.
When power is turned ON (inverter reset), the initial setting status of the sign bit is "positive" and the set frequency is "0 Hz".
(The motor does not operate at the frequency set before turning OFF the power (inverter reset).)
• Setting Pr.811 Set resolution switchover = "1 or 11" changes the unit from 1 r/min to 0.1 r/min. (Pr.811 is only available for
the FR-A800 series.)
78
PPO TYPE SUPPORT SPECIFICATION