8.5
Outline of PNU
You can use the PNU to make inverter settings from the network.
The data used with the network is denoted PNU (P) to differentiate it from the parameter (Pr.) of the inverter.
This chapter explains the module type "A5NP".
NOTE
• Parameter definitions differ according to the module type selected. When using "PPO type 1" to "PPO type 5", refer to
60.
8.6
PROFIBUS PNU (module type A5NP)
8.6.1
Real-time monitor area (IND = H0000 (IND = H00, PP = H00))
Different inverter data can be monitored using the master.
IND
PNU
H0000
H0
Output frequency
H0000
H1
Output current
H0000
H2
Output voltage
NOTE
• The PNU number of each monitor item corresponds to the number of the inverter's RS-485 communication dedicated
monitor that is one less than the PNU number in hexadecimal. For details on the monitor items, refer to the monitor display
section in the Instruction Manual (Detailed) of the inverter.
86
PPO TYPE NON-SUPPORT SPECIFICATION
Item
Increments
0.01 Hz
0.01 A/0.1 A
0.1 V
page