Pr.900 To Calibration Parameter (Frequency) Area (Ind = H0300 (Ind = H03, Pp = H00)) - Mitsubishi Electric 800 Series Instruction Manual

8.7.2 Pr.900 to calibration parameter (frequency) area (IND = H0300 (IND = H03, PP =
H00))
The following parameters can be set with IND = H0300.
Refer to the Instruction Manual (Detailed) of the inverter for details of the parameters.
IND PNU
H0300 H0
H0300 H1
H0300 H2
H0300 H3
H0300 H4
H0300 H5
H0300 H11
H0300 H12
H0300 H13
H0300 H14
H0300 H1E
H0300 H1F
H0300 H20
H0300 H21
H0300 H22
H0300 H23
Pr.
C0 (900) FM/CA terminal calibration
C1 (901) AM terminal calibration
C2 (902) Terminal 2 frequency setting bias frequency
125 (903) Terminal 2 frequency setting gain frequency
C5 (904) Terminal 4 frequency setting bias frequency
126 (905) Terminal 4 frequency setting gain frequency
C12 (917) Terminal 1 bias frequency (speed)
C14 (918) Terminal 1 gain frequency (speed)
C16 (919) Terminal 1 bias command (torque/magnetic flux)
C18 (920) Terminal 1 gain command (torque/magnetic flux)
C8 (930) Current output bias signal
C10 (931) Current output gain signal
C38 (932) Terminal 4 bias command (torque/magnetic flux)
C40 (933) Terminal 4 gain command (torque/magnetic flux)
C42 (934) PID display bias coefficient
C44 (935) PID display gain coefficient
Name
PPO TYPE NON-SUPPORT SPECIFICATION
8
91