8.7
Standard parameters
8.7.1
Normal parameter area (IND = H0200 (IND = H02, PP = H00))
You can use the PNU to make parameter settings from the network.
The table below lists PNU numbers corresponding to parameter numbers.
Standard parameter examples are introduced below. Refer to the examples and make parameter settings.
Refer to the Instruction Manual (Detailed) of the inverter for details of the parameters.
• Example of parameter list
IND
PNU
Pr.
H0
0
H1
1
H2
2
H3
3
H0200
H4
4
H5
5
H6
6
NOTE
• Write to Pr.77 and Pr.79 is not allowed from the network with FR-A8NP. (Read is allowed.)
90
PPO TYPE NON-SUPPORT SPECIFICATION
Name
Torque boost
Maximum frequency
Minimum frequency
Base frequency
Multi-speed setting (high speed)
Multi-speed setting (middle speed)
Multi-speed setting (low speed)