Mitsubishi Electric 800 Series Instruction Manual page 90

Set frequency read/write
The frequency set to the inverter can be read/written from the master.
IND PNU
H0100 HD
H0100 HE
*1 Writing to PNU = HD or PNU = HE can be read out from PNU = HD.
*2 To change the running frequency consecutively, always write data to the inverter RAM.
Terminal input read
The analog input values of terminals 2, 4, and 1 can be read.
IND PNU
H0100 HF
H0100 H10
H0100 H11
Fault History (IND = H01, PP = H01, SEV_II, Block II)
The past eight inverter fault records can be read.
(For the data codes or details of fault records, refer to the Instruction Manual (Detailed) of the inverter.)
IND PNU
H0101 H0
Latest fault/Batch clearing of fault records
H0101 H1 Second latest fault
H0101 H2 Third latest fault
H0101 H3 Fourth latest fault
H0101 H4 Fifth latest fault
H0101 H5 Sixth latest fault
H0101 H6 Seventh latest fault
H0101 H7 Eighth latest fault
*1 Writing a value of H0000 to this parameter clear all fault history. All other parameters at this index are read only.
Item
*1
Set frequency (RAM)
*1*2
Set frequency (EEPROM)
Item
Terminal 2 input value
Terminal 4 input value
Terminal 1 input value
Item
Data definition
Set frequency (RAM) is read or written.
Write set frequency to EEPROM.
Minimum setting increments
0.1%
0.1%
0.1%
*1
PPO TYPE NON-SUPPORT SPECIFICATION
8
89