Mitsubishi Electric 800 Series Instruction Manual page 31

About setting
• Operation at an error occurrence
Fault description Pr.502 setting
0
1, 11
Communication line 2, 12
3
4
0, 3
Communication option 1, 2, 11, 12
4
*1 When the communication returns to normal within the time period set in Pr.500, the protective function (E.OP1) is not activated.
• Operation after the time in Pr.500 elapses after an error occurrence
Fault description Pr.502 setting
0
1, 11
Communication line 2, 12
3
4
0, 3
1, 2, 11, 12
Communication option
itself
4
*2 When an error occurs, the inverter outputs a command to decelerate the motor or shuts off the output, and outputs the fault,
independently of the Pr.500 setting.
*3 During position control (for the FR-A800 series only), the operation is continued to the target position.
30
INVERTER SETTING
Operation
*1
Continued Normal
Output shutoff "E.1"
Output to decelerate and
"E.1" after stop
stop the motor
Continued "CF" warning
Operation
Output shutoff "E.OP1"
Output to decelerate and
"E.OP1" after stop
stop the motor
Normal
Continues operation with
*3
the Pr.779 setting.
"CF" warning
Output stop status
"E.1" kept
*2
continues.
Continues operation with
"CF" warning
*3
the Pr.779 setting.
Indication Fault output
*1
Not output
Provided
Provided after stop
Not output
Indication Fault output
Provided
Provided after stop
Not output
*2
Kept provided
Not output
*1
*2