Daily Operating Checks; Operate On The User Interface - Beko DRYPOINTRA III 20 Translation Of Original Installation And Operation Manual

Original installa�on and opera�on manual
9.2

Daily operating checks

With the product in normal running condition, every day check the:
•
Stability of dew point value.
•
Functioning of condensate drain.
•
Cleanliness of the condenser.
•
Cyclical run/stop of the cooling fan.
•
Noiseless of normal running condition.
9.3

Operate on the User Interface

For operation of the product, the preparatory tasks must have been completed.
The procedure on section "8 Commissioning" on page 66 was carried out.
1.
2. The product is switched ON and started.
Compressed air flows into the air circuit.
3.
Water-cooled models: cooling water flows into the water circuit.
4.
The condensate is regularly discharged.
5.
The section "3.2 User Interface" on page 29 was fully read and applied.
6.
INFORMATION
72 | 118
Preparatory tasks
Callouts
All callouts [L#] and [B#] mentioned in the following are referred to the section
"3.2 User Interface" on page 29.
DRYPOINT ® RA III