Table of Contents
Advertisement
Original installa�on and opera�on manual
•
Only use materials approved for the respective application.
•
Use only suitable tools that are in proper working order.
•
Only use cleaned pipes and hoses that are free of dirt and corrosion.
•
Never use abrasive or aggressive cleaning agents or solvents which could damage the outer coating
(e.g. markings, type plate, corrosion protection, etc.).
•
Never clean the product with hard or pointed implements.
•
Use only the specified materials and media for cleaning.
•
Observe statutory, local and in-house hygiene regulations.
•
Pay attention to order and cleanliness during maintenance and repair work. Prevent contamination
from entering the opened product and accessories. Store disassembled components and accessories
directly in a safe place.
•
After completing maintenance and repair work, remove all tools and cleaning agents used, as well as
all parts that are no longer needed, from the work area.
•
Only dispose of product and accessories when cleaned and freed of any residue.
•
Dispose of all components, parts, operating and auxiliary materials as well as cleaning agents
professionally and in accordance with all locally applicable regulations and standards.
•
Dispose of electrical and electronic components using a specialist disposal company or return them to
manufacturer.
•
Dispose of the refrigerant fluid in accordance with applicable national and local regulations and in
accordance with the requirements indicated on the safety data sheet of the refrigerant fluid.
2.5.8
Handling hazardous substances
Contact with condensate containing substances which endanger health and the environment can pose a
health hazard, causing irritation and/or damage to the eyes, skin and mucous membranes. In addition,
polluted condensate must be prevented from entering the sewerage system, waters or the ground.
For the safe handling of polluted condensate the following points must be observed:
•
Use suitable protective equipment when handling condensate.
•
Pick up and dispose of any leaking or spilled condensate in accordance with applicable regional laws
and requirements.
The product contains fluorinated greenhouse refrigerant fluid. Improper handling of the refrigerant fluid can
be harmful to your health and cause damage to the environment.
For the safe handling of refrigerant fluid the following points must be observed:
•
Use suitable protective equipment when handling refrigerant fluid. Self contained breathing
apparatus is recommended, where unknown exposure may be expected, e.g. during maintenance,
repair and dismantling works on refrigerant circuit.
•
Pick up and dispose the refrigerant fluid in accordance with all nationally and locally applicable
regulations. Discharge to atmosphere in large quantities should be avoided.
16 | 118
DRYPOINT
®
RA III
Advertisement
Table of Contents
