Disposal Of Materials And Components - Beko DRYPOINTRA III 20 Translation Of Original Installation And Operation Manual

DRYPOINT ® RA III

15.2 Disposal of materials and components

For disposal work to be carried out, the following protective equipment must be always worn and the
preparatory tasks must have been completed.
Tools
•
No tool necessary
The procedure on section "14 Disassembly" on page 101 was carried out.
1.
Operating / auxiliary material
Adsorption materials, filter materials, cleaning wipes
and protective clothing – contaminated by oils or
other hazardous substances
Adsorption materials, filter materials, cleaning wipes
and protective clothing – with the exception of
those classified by 15 02 02
Packaging
Component
Whole device (with or without refrigerant fluid)
Refrigerant fluid
Refrigerant compressor (sealed, with oil included)
Filter of refrigerant fluid (sealed)
Tubes of refrigerant circuit
Condenser (tubes)
Condenser (frame)
Fan grid
Hot gas by-pass valve
Panels, mounting frame, supports, screws
Prerequisites
Material
•
No material necessary
Preparatory tasks
Material
Paper / cardboard
Plastic
Wood
Material
Copper
Iron / carbon steel
Original installa�on and opera�on manual
Protective equipment
EU waste code
- 15 02 02
- 15 02 03
15 01 01
15 01 02
15 01 03
EU waste code
- 16 02 11
- 14 06 01
- 16 02 15
17 04 01
17 04 05
105 | 118