3Ph Models - Beko DRYPOINTRA III 20 Translation Of Original Installation And Operation Manual

DRYPOINT ® RA III
8.2.2

3ph models

NOTE
NOTE
INFORMATION
INFORMATION
Refrigerant compressor failure
Starting the product with the refrigeration compressor oil still cold can irreparably
damage the refrigeration compressor.
•
Wait at least 2 hours before starting the product.
Refrigerant compressor failure
Start and stop the product too often could damage the refrigerant compressor in
an unrepairable way.
•
Wait at least 5 minutes between a stop and a new start.
•
Start / stop actions on the device must be limited to 6 times an hour.
Dew point value
A dew point between 0 °C (+32 °F) and +10 °C (+50 °F) displayed on the User
Interface is considered to be correct according to the possible operating
conditions, e.g. flow rate, air inlet temperature, ambient temperature, etc.
Short-term inactivity
During short-term inactivity, max. 2 / 3 days, it is advisable to leave the product
connected to the power supply and leave ON the ON-OFF switch.
Original installa�on and opera�on manual
69 | 118