Assembly Conditions - Beko DRYPOINTRA III 20 Translation Of Original Installation And Operation Manual

DRYPOINT ® RA III
4.8

Assembly conditions

Observe the following conditions when setting up and selecting the place of installation:
•
The place of installation is clean and dry, protected from direct sunlight, rain, frost, sources of heat
and fire. Unlimited exchange of air and sufficient ventilation is guaranteed, refer to section "4.8.1
Minimum distance from adjacent structures" on page 54.
•
The place of installation has sufficient space for all actions at the product, e.g. assembly and
maintenance.
•
The set-up area is level, smooth and suitable to bear the weight of the product.
•
Sealed set-up area or spill protection basin are available. In the event of damage, no untreated
condensate or oil may get into the sewer system or the soil.
•
A customer-side compressed air supply line is available.
•
A customer-side condensate collection line is available.
•
A customer-side 1ph+N+E / 3ph+E power supply line is available.
•
A customer-side cooling water line is available for water-cooled models. Cooling water meets the
requirements specified in section "4.3 Cooling water parameters, water-cooled models" on page 41.
Original installa�on and opera�on manual
53 | 118