Dsi Connection - Renishaw TONiC T20x1 REXM20 Installation Manual

DSi connection

Ensure that both TONiC readheads are calibrated before connecting them to the DSi.
NOTE: The DSi should be placed as close to the power supply as possible to minimise voltage drop.
Local mounting method
Plug the TONiC interfaces directly into the DSi.
Compatible DSi's
Rotation
Full rotation
Partial rotation
1
See the DSi dual readhead angle encoder system data sheet (Renishaw part no. L-9517-9466) for more information.
30 TONiC REXM20 / REXT20 angle encoder system installation guide
™
Remote mounting method
Extension cables between the TONiC interfaces and the DSi.
DSi type 1
DSi-QTL
DSi-QTM
DSi-QUL
DSi-QUM
NOTE: The remote DSi has an additional 120 ohm termination resistor on the quadrature outputs.
Compatible DSi's
Rotation
Full rotation
Partial rotation
DSi type 1
DSi-QTR
DSi-QTS
DSi-QUR
DSi-QUS