Table of Contents
Advertisement
Legal notices
Patents
Features of Renishaw's encoder systems and similar products are the subjects of the following
patents and patent applications:
CN100543424
EP1766334
JP4932706
EP1766335
IN281839
JP5386081
EP1946048
JP5017275
US7624513
EP1957943
US7839296
CN1293983
JP4813018
US7723639
CN1314511
US8987633
US8466943
CN101371105
JP5676850
US8017904
Terms and conditions and warranty
Unless you and Renishaw have agreed and signed a separate written agreement, the equipment
and/or software are sold subject to the Renishaw Standard Terms and Conditions supplied with
such equipment and/or software, or available on request from your local Renishaw office.
Renishaw warrants its equipment and software for a limited period (as set out in the Standard
Terms and Conditions), provided that they are installed and used exactly as defined in associated
Renishaw documentation. You should consult these Standard Terms and Conditions to find out
the full details of your warranty.
Equipment and/or software purchased by you from a third-party supplier is subject to separate
terms and conditions supplied with such equipment and/or software. You should contact your
third-party supplier for details.
4
TONiC
REXM20 / REXT20 angle encoder system installation guide
™
US7659992
CN100507454
US7550710
CN101300463
IN317599
CN101310165
DE10297440
GB2397040
EP1469969
JP5002559
EP1974186
IN312608
Declaration of Conformity
Renishaw plc hereby declares that the TONiC
essential requirements and other relevant provisions of:
•
the applicable EU directives
•
the relevant statutory instruments under UK law
The full text of the declaration of conformity is available at: www.renishaw.com/productcompliance.
Compliance
Federal Code Of Regulation (CFR) FCC Part 15 –
RADIO FREQUENCY DEVICES
47 CFR Section 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
47 CFR Section 15.21
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc
or authorised representative could void the user's authority to operate the equipment.
47 CFR Section 15.105
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
encoder system is in compliance with the
™
C
Advertisement
Table of Contents
