System Connection - Renishaw TONiC T20x1 REXM20 Installation Manual

System connection

Approved ESD precautions must be followed at all times during readhead and interface electrical connections.
The readhead is connected to the Ti interface via a small, rugged connector to allow for easy feed-through during installation.
Connecting the readhead
1. Remove the cover plate as shown (2 × M2.5 hex head screws).
2. Taking care not to touch the pins, plug the connector into the socket in the interface, ensuring correct orientation as shown.
24 TONiC REXM20 / REXT20 angle encoder system installation guide
™