Table of Contents
Advertisement
47 CFR Section 15.27
This unit was tested with shielded cables on the peripheral devices. Shielded cables must be
used with the unit to ensure compliance.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: TONiC
Responsible Party - U.S. Contact Information
Renishaw Inc.
1001 Wesemann Drive
West Dundee
Illinois
IL 60118
United States
Telephone number: +1 847 286 9953
Email:
usa@renishaw.com
ICES-003 – Information Technology Equipment (including Digital Apparatus)
This ISM device complies with Canadian ICES-003(A).
Cet appareil ISM est conforme à la norme ICES-003(A).
Intended use
The TONiC encoder system is designed to measure position and provide that information
to a drive or controller in applications requiring motion control. It must be installed, operated,
and maintained as specified in Renishaw documentation and in accordance with the Standard
Terms and Conditions of the Warranty and all other relevant legal requirements.
Further information
Further information relating to the TONiC encoder range can be found in the TONiC encoder
system data sheet (Renishaw part no. L-9517-9337), TONiC DSi dual readhead rotary encoder
system data sheet (Renishaw part no. L-9517-9466), and REXM20 ultra-high accuracy angle
encoder data sheet (Renishaw part no. L-9517-9318). These can be downloaded from our
website at
www.renishaw.com/tonicdownloads
Renishaw representative.
and are also available from your local
www.renishaw.com
5
Advertisement
Table of Contents
