Table of Contents
Advertisement
System connection - Ti interface
Approved ESD precautions must be followed at all times during readhead and interface electrical connections.
The readhead is connected to the Ti interface via a small, rugged connector to allow for easy feed-through during installation.
Connecting the readhead
4. Remove the cover plate as shown (2 × M2.5 hex head screws).
5. Taking care not to touch the pins, plug the connector into the socket in the interface, ensuring correct orientation as shown.
34
TONiC™ FS RTLC20-S Functional Safety installation guide and safety manual
Original instructions
Advertisement
Table of Contents
