Lenovo ThinkSystem SD550 V3 User Manual page 198

Figure 121. Removal of the Firmware and RoT security module
After this task is completed
1. Install a replacement unit (see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a firmware and RoT security module
Follow instructions in this section to install a firmware and RoT security module (ThinkSystem V3 Firmware
and Root of Trust Security Module).
About this task
Important: This task must be operated by trained technicians that are certified by Lenovo Service. Do no
attempt to remove or install it without proper training and qualification.
(Lenovo trained technician only) After replacing the firmware and RoT security module, update the UEFI
firmware to the specific version supported by the server. For detailed information on how to update the
firmware, see
https://glosse4lenovo.lenovo.com/wiki/glosse4lenovo/view/How+To/System+related/
How+to+do+RoT+Module+FW+update+on+ThinkSystem+V3+machines/
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read "Installation Guidelines" on page 43
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node and chassis; then, take the component out of the package and place it on a static-protective
surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sd550v3/7dd2/downloads/driver-
list to see the latest firmware and driver updates for your server.
• Go to "Update the firmware" on page 231
ThinkSystem SD550 V3 User Guide
188
"Install a firmware and RoT security module" on page
and "Safety inspection checklist" on page 44
for more information on firmware updating tools.
188).
.
to make sure that