Lenovo ThinkSystem SD550 V3 User Manual page 100

Figure 43. Separation of the internal CFF RAID adapter from the tray
2. Install a replacement unit (see
3. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install an internal CFF RAID adapter
Follow instructions in this section to install an internal CFF RAID adapter.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read "Installation Guidelines" on page 43
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node and chassis; then, take the component out of the package and place it on a static-protective
surface.
• The internal CFF RAID adapter is supported only in two-processor configurations.
Procedure
Step 1. Install the internal CFF RAID adapter to the internal adapter bracket.
a. Align the notches of the CFF RAID adapter tray with the guide pins on the bracket.
b. Lower the CFF RAID adapter and slide it as illustrated until the CFF RAID adapter is securely
seated in the bracket.
ThinkSystem SD550 V3 User Guide
90
"Install an internal CFF RAID adapter" on page
and "Safety inspection checklist" on page 44
90).
to make sure that