Lenovo ThinkSystem SD550 V3 User Manual page 122

2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a flash power module
Follow instructions in this section to install a flash power module.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read "Installation Guidelines" on page 43
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node and chassis; then, take the component out of the package and place it on a static-protective
surface.
Procedure
Step 1. Install the flash power module to the air baffle.
a. Note the orientation of the flash power module; then, gently insert one side of the flash
power module into the retaining clip.
b. Press down the flash power module on the other side until it snaps into place.
Figure 58. Installation of the flash power module
Step 2. Route and connect the flash power module cable and its extension cable that comes with the flash
power module kit to the CFF RAID adapter.
ThinkSystem SD550 V3 User Guide
112
and "Safety inspection checklist" on page 44 to make sure that