Table of Contents
Advertisement
d.
If a flash power module is installed on the front air baffle, disconnect the flash power module
cable and remove the flash power module (see
110).
Step 2.
Remove the air baffle from the node.
a.
Slightly press the right and left release latches of the air baffle.
b.
Lift the air baffle out of the node.
Note: Depending on the specific configuration, the node might or might not come with a rear
air baffle.
Figure 38. Removal of the front air baffle
ThinkSystem SD550 V3 User Guide
84
"Remove the flash power module" on page
Advertisement
Table of Contents
Troubleshooting
