Lenovo ThinkSystem SD550 V3 User Manual page 161

Figure 92. Removal of a PCIe adapter
After this task is completed
1. Install a replacement unit or filler (see
Notes:
• Follow the rules below to install different fillers.
– No riser cage installed in the node:
– Install a riser filler (vented).
– No PCIe adapter installed in the riser:
– Install a PCIe filler (vented) in each slot.
– One GPU adapter installed in the riser:
– Install the GPU adapter in slot 2.
– Install a GPU PCIe filler (non-vented) in slot 1.
– One PCIe adapter installed in the riser:
– Install the PCIe adapter in slot 1.
– Install a PCIe filler (vented) in slot 2.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a PCIe adapter
Follow instructions in this section to install a PCIe adapter.
About this task
"Install a PCIe adapter" on page
Chapter 5
151).
.
Hardware replacement procedures
151