c.
Remove the top cover (see
Step 2.
Disconnect all the cables from the CFF RAID adapter.
Step 3.
Remove the internal adapter bracket from the node.
a.
Pull both plungers on the sides of the internal adapter bracket to disengage the bracket from
the node.
b.
Carefully lift the internal adapter bracket out of the node.
Figure 73. Removal of the internal adapter bracket
After this task is completed
1. Install a replacement unit (see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
ThinkSystem SD550 V3 User Guide
128
"Remove the top cover" on page
"Install an internal adapter bracket" on page
203).
129).