Lenovo ThinkSystem SD550 V3 User Manual page 169

Figure 98. Removal of the power bus bar
After this task is completed
1. Install a replacement unit (see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a power bus bar
Follow instructions in this section to install a power bus bar.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read "Installation Guidelines" on page 43
you work safely.
"Install a power bus bar" on page
and "Safety inspection checklist" on page 44
159).
.
Chapter 5 Hardware replacement procedures
to make sure that
159