Table of Contents
Advertisement
Figure 54. Fan removal
After this task is completed
1. Install a replacement unit (see
Important: To maintain proper cooling, all the fans must be installed during operation.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a fan
Follow instructions in this section to install a fan.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read
"Installation Guidelines" on page 43
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node and chassis; then, take the component out of the package and place it on a static-protective
surface.
Procedure
Step 1.
Install the fan.
"Install a fan" on page
107).
and
"Safety inspection checklist" on page 44
.
Chapter 5
Hardware replacement procedures
to make sure that
107
Advertisement
Table of Contents
Troubleshooting
