Lenovo ThinkSystem SD550 V3 User Manual page 110

Figure 50. Removal of the drive backplane
After this task is completed
1. Install a replacement unit (see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a drive backplane
Follow instructions in this section to install a drive backplane.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read "Installation Guidelines" on page 43
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node and chassis; then, take the component out of the package and place it on a static-protective
surface.
Procedure
Step 1. Install the drive backplane.
ThinkSystem SD550 V3 User Guide
100
"Install a drive backplane" on page
and "Safety inspection checklist" on page 44
100).
to make sure that