Lenovo ThinkSystem SD550 V3 User Manual page 254

3. If the installation is successful, XCC REST API show the message "License key upgraded successfully.
The features will be activated on the processor after system power cycle".
Otherwise, see "Enable Intel
Use LXCE OneCLI to install Intel On Demand
Input the following command, where <key_file> specifies the Activation Key:
OneCli.exe fod install --keyfile <key_file>
If successfully installed, the response will show:
Successfully install key
Call Lenovo support if the response shows the following:
Failed to install key
Acquiring and uploading Intel On Demand State Report
After completing enabling or transferring Intel On Demand, acquire and upload the State Report via XCC
Web GUI, XCC REST API, and LXCE OneCLI. See the following for more information.
Use XCC Web GUI to upload State Report
1. Open XCC Web GUI, go to BMC Configuration ➙ License ➙ On Demand Capabilities for Intel CPU
➙ Choose CPU ➙ Export State Report
Figure 160. Export State Report via XCC Web GUI
2. Upload State Report via "On Demand Feedback" section in
Use XCC REST API to upload State Report
1. Use the GET method with the following Request URL to retrieve CPU State Report API, where X is the
CPU numbering:
GET https://bmc_ip/redfish/v1/LicenseService/Licenses/CPUX_OnDemandCapability
For example, to retrieve CPU 1 State Report API, see the following:
GET https://bmc_ip/redfish/v1/LicenseService/Licenses/CPU1_OnDemandCapability
2. In the response JSON object, the response of the target field of the LenovoLicense.ExportStateReport
field is the CPU State Report API, where X is the CPU numbering:
ThinkSystem SD550 V3 User Guide
244
® On Demand Troubleshooting" on page 248.
https://fod.lenovo.com/lkms
.