Figure 28. Installation of the chassis midplane
After this task is completed
1. Reinstall the PSU cage to the chassis (see
2. Install the chassis to the rack (see
3. Reinstall the nodes into the chassis (see
4. Reinstall each PSU slot with a PSU or PSU filler (see
Installation of a PSU
5. Proceed to complete the parts replacement (see
Install a PSU cage
Follow instructions in this section to install a PSU cage.
About this task
To avoid potential danger, make sure to read and follow the safety information.
"Install a PSU cage" on page
"Install the chassis to the rack" on page
"Install a node to the chassis" on page
filler).
73).
"Install a hot-swap power supply" on page 63
"Complete the parts replacement" on page
.
Chapter 5
Hardware replacement procedures
56).
78).
208).
and
73