Lenovo ThinkSystem SD550 V3 User Manual page 229

From (2.5-inch drive
backplane)
NVMe 0-1
2
NVMe 2-3
3a
NVMe 4-5
3b
2. Connect the SATA cables (
Figure 146. SATA cables on drive backplane
3. Install the drive cage assembly to the node (see
4. Connect the RAID power cable (
internal adapter bracket with the CFF RAID adapter on it to the node (see
bracket" on page 129).
5. Route and connect the SATA cables (
connectors on the CFF RAID adapter.
To (system board)
NVMe 0-1 connector
2
(Gen5)
NVMe 2-5 connector
3
(Gen5)
and ) to the drive backplane.
4 5
"Install a drive cage assembly" on page
) and RAID signal cable (
6
and ), RAID power cable (
4 5
Cable
MCIO x8 to MCIO x8 (450 mm)
MCIO x8 (85 mm)
MCIO x8 (110 mm)
) to the system board; then, install the
7
"Install an internal adapter
), and RAID signal cable (
6
Chapter 6
to MCIO x16
101).
) to the
7
.
Internal cable routing
219