Lenovo ThinkSystem SD550 V3 User Manual page 96

• For proper cooling and airflow, make sure to install the required air baffles before turning on the node.
Operating the node without the air baffle(s) might damage node components.
• Depending on the specific configuration, the hardware might look slightly different from the illustrations in
this section.
Procedure
Step 1. Align the air baffle with the guide pins and edges on both sides of the node.
Step 2. Lower the air baffle into the node; then, press it down until it is securely seated.
Important:
• Make sure that the lower partitions of the air baffle properly separate the DIMMs and the cables
as illustrated.
• Depending on the specific configuration, the node might or might not come with a rear air baffle.
Figure 40. Installation of the front air baffle
ThinkSystem SD550 V3 User Guide
86