Table of Contents
Advertisement
Maintenance
CLEANING THE MIRROR #4
Mirror #4
9.6.5
Ultrasonic sensor (Sonar Technology
76
1. While holding the mirror, loosen the two knurled screws (1) and li the mirror
from the mirror holder.
Caution
Make sure that the mirror does not grind over the mirror holder,
as it can be scratched very easily.
2. Flush the mirror with cleaning liquid to wash away coarse soiling.
3. Put some cleaning liquid onto the mirror and leave the liquid for 1 minute to
take effect.
4. Soak a cleaning tissue with cleaning liquid and carefully wipe off the surface.
5. Now carefully re-insert the mirror and fixate it with the two knurled screws.
)
TM
The sensor can either be cleaned with a brush or wiped with a dry or damp
microfiber or anti-static cloth using a gentle cleaning fluid. An isopropanol or
ethanol solution can be used for stubborn dirt.
However, this should not be allowed to soak in or used in the long term (over
several months or years).
Advertisement
Table of Contents
