1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Engraver
  5. Speedy 360
  6. Operating manual

Trotec Speedy 360 Operating Manual

Hide thumbs Also See for Speedy 360:
Table of Contents

Advertisement

Quick Links

Download this manual
Speedy 360
Operating manual
8085
BA 8085_4.12_DE (12/2023)
ENGLISH

Advertisement

Table of Contents
loading

Related Manuals for Trotec Speedy 360

Summary of Contents for Trotec Speedy 360

  • Page 1 Speedy 360 Operating manual 8085 BA 8085_4.12_DE (12/2023) ENGLISH...
  • Page 2 +31 850 70 51 55 +48 22 339 35 39 +52 55 5351-7252 support@troteclaser.nl serwis_pl@trodat.net mexico@troteclaser.com Trotec Laser (XIAMEN) CO., LTD. #5 GuAn Road South, MaXiang Trotec Laser Inc. Rubber Stamp & Engraving Town +1 866 226 8505, Option 2...
  • Page 3   Trotec Laser GmbH Freilingerstraße 99 4614 Marchtrenk, Austria General contact to Technical Support: Tel.: +43 7242 239-7000 E-mail: techsupport@troteclaser.com WWW.TROTECLASER.COM...
  • Page 4   Technical Changes Technical specifications are subject to change without notice. Trotec Laser GmbH reserves the right to improve or modify any of the products without prior notice. © Copyright This documentation with all illustrations is intellectual property of Trotec Laser GmbH. The entire documentation is given to the user for personal use only.

  • Page 5: Table Of Contents

    Content Content General Information....................... 8 Information about this manual....................8 Explanation of symbols....................... 8 Liability and warranty......................... 9 Scope of delivery (standard configuration)................10 1.4.1 Accessory box................................10 Type plate..........................11 Safety........................... 12 General safety notes........................12 2.1.1 Intended use................................12 2.1.2 Improper use................................13 2.1.3 Residual risk................................
  • Page 6 Content Technical Data......................27 Dimensions and weight......................27 Network connection........................28 Computer connection........................ 28 Requirements for the electrical connections of the machine............29 Exhaust system requirements....................30 Materials list..........................31 Machine overview......................35 Anlagenübersicht........................35 Ruby server status LED......................37 Front door..........................38 Tables (multifunctional table concept)..................
  • Page 7 Cleaning the mirrors...............................75 9.6.5 Ultrasonic sensor (Sonar Technology )......................76 Troubleshooting......................77 10.1 Error, cause and remedy......................77 Contact details......................79 Disassembly........................80 Disposal........................81 Appendix........................82 14.1 Antwortformular Ruby Sprachen hinterlegt................85 Acronyms........................86 Datasheet 8085 Speedy 360 C..................88 CE_8085_8086_Speedy 360_Speedy 400_Konformitätserklärung_D......91...

  • Page 8: General Information

    General Information General Information Aus Gründen der besseren Lesbarkeit wird in der Betriebsanleitung auf geschlechtsneutrale Endungen (z.B. “/innen”) verzichtet. Es wird hiermit ausdrücklich erklärt, dass an allen Textstellen, wo natürliche Personen bzw. Personengruppen erwähnt werden, immer Menschen aller Geschlechter gemeint sind. Information about this manual Before beginning any work on the machine, read this manual completely and carefully.

  • Page 9: Liability And Warranty

    Furthermore, Trotec Laser GmbH shall accept no liability whatsoever for damage caused by the use of non-original parts and accessories. Additionally, Trotec Laser GmbH shall not be held responsible for any personal injury or property damage, of an indirect or specific nature, consequential loss, loss of commercial profits, interruption to business, or loss of commercial information resulting from use of the equipment described in this manual.

  • Page 10: Scope Of Delivery (Standard Configuration)

    General Information Scope of delivery (standard configuration) – Laser machine – Storage medium (includes instructions) – Focus tool (as per lens order) – Cleaning set for lenses – Air nozzles (2 pieces: ø3 and ø7 mm) – Lenses as per order –...

  • Page 11: Type Plate

    General Information Type plate The data plate with the CE mark is located on the back of the unit. Transfer the serial number, model and year of manufacture to your manual and always refer to this information in case of inquiries, problems with the unit, or spare parts orders. Serial number: Model: Year of manufacture:...

  • Page 12: Safety

    For information about materials, see chapter "Materials list". Alternatively, contact your Trotec representative or our technical support team in your area. The unit may only be operated, maintained, and repaired by persons familiar with the intended application and the hazards inherent to the machine.

  • Page 13: Improper Use

    Use of the machine for any purposes other than those intended or described in the present manual is regarded as improper and therefore prohibited. Trotec Laser GmbH will not accept any liability for damage caused by improper use. The operator is solely liable for all damages caused by improper use.

  • Page 14: Applicable Safety Regulations

    4 and appropriate precautionary measures must be taken (see chapter "Laser classes of this machine"). 2.1.6 Applicable safety regulations The following guidelines and regulations must be observed to avoid risks when operating Trotec laser systems. GUIDELINES/REGULATIONS 2006/42/EC EC Machinery Directive 2014/30/EU EMC Guideline...
  • Page 15 Instructions and directives in this manual may differ locally, regionally, and internationally. Please observe the country-specific guidelines that apply to you. The operator is responsible for meeting all safety requirements, as Trotec Laser GmbH has no influence on the correct use of the unit.

  • Page 16: Areas Of Responsibility

    Safety LASER RADIATION WARNING Warning Laser Laser radiation of Class 2 (US: class II) For Class 2 (US: class II) laser is short term exposure (up to 0.25 seconds) harmless to the eyes and can therefore be operated without additional protective measures. However it can cause irritation of the eyes if the natural avoidance reaction (staring into the laser beam deliberately) or eyelid closure reflex is suppressed.

  • Page 17: Responsibilities Of The Operating Personnel

    • The machine and its components, such as the lens and mirrors, are to be kept clean at all times. • Caution The adjustment of the beam path may only be carried out by service personnel of Trotec Laser GmbH.

  • Page 18: Requirements For Operating An Service Personnel

    Personnel must be qualified to operate the machine through adequate and detailed training. If a member of staff • does not have the required knowledge, they must be trained internally. A Trotec training course can be requested and recorded in the training/acceptance protocol (see "Appendix").

  • Page 19: Warning And Information Labels

    If any warning and safety stickers are lost or damaged, the user is not able identify risks anymore, and there is danger of injury. – Replace lost or damaged labels immediately. – Contact your Trotec Laser GmbH dealer for details.

  • Page 20: Safety Devices

    Safety and protection devices must be fully functional at all times. – In case of assumed or presumed damage of safety devices, disconnect the machine from the mains. – Damaged safety and protection devices need to be replaced by a Trotec technician immediately. Technical protective measures 2.6.1 Main switch Pressing the main switch on the backside of the machine to disconnect the machine from the mains power supply.

  • Page 21: Interlock Safety Switches

    Safety 1. Turn the emergency stop button counterclockwise to unlock it so that the green marking is visible. 2. Restart the laser system using the key switch. 2.6.4 Interlock safety switches Interlock safety switch query the closed status of the acrylic top lid, side panels and front door. If the safety devices are open or not present, the laser cannot be operated.

  • Page 22: Secondary (Indirect) Hazards

    Safety Secondary (indirect) hazards See also "Residual risk". 2.7.1 Fire hazard Warning Fire hazard Fire hazard from gas and processing of inflammable materials. – Do not operate the device without supervision. – Keep CO fire extinguisher ready at hand in the immediate vicinity of the device. If a main laser beam hits easily flammable material, e.g.

  • Page 23: Hazards Due To Damaged Optics

    Safety 2.7.3 Hazards due to damaged optics Warning Damage to the lenses. Dirty lenses absorb laser radiation, which can destroy them. Broken or damaged lenses and thermal decomposition of lenses release particles that are hazardous to health. – Clean the deflection mirror and lenses in the laser beam guidance area regularly. –...
  • Page 24 Safety Before approaching the system again, wait for at least 30 min until the reaction has abated. • Wear proper protective clothing (respiratory protection, protective goggles, protective suit, rubber or plastic gloves). • Provide ventilation. • When approaching the system again, pay attention to odors. •...

  • Page 25: In Case Of Emergency

    • In the event of fire: Fight the fire with a CO fire extinguisher if it is safe to do so. • Notice Aer a deletion, Trotec Technical Support must be involved before the system is put back into operation.
  • Page 26 Safety WHAT TO DO IN THE EVENT OF AN ACCIDENT; FIRST AID If eye damage occurs due to laser radiation, the casualty must be immediately seen by an ophthalmologist. • The first aider must always ensure that they protect themselves. •...

  • Page 27: Technical Data

    Technical Data Technical Data The technical data sheet can be found in the appendix of this manual. Dimensions and weight Description Dimension Height front side with open lid 1774 mm (69.8 inch) Height front side 998 mm (39.3 inch) Depth with exhaust hose connection and gas kit light 843 mm (33.2 inch) Depth without exhaust hose connection and gas kit light 790 mm (30.7 inch)

  • Page 28: Network Connection

    Technical Data Network connection RECOMMENDATIONS PC Client Operating system: Windows 64-bit • Screen Resolution: min. 1920x1080 (FullHD) • Browser: latest Google Chrome • RAM: min. 4GB • Processor: Min. i7 or comparable • Network DHCP Active • 100Mbit Speed • CAT5e or higher •...

  • Page 29: Requirements For The Electrical Connections Of The Machine

    Technical Data Requirements for the electrical connections of the machine Laser power 55–80 W (TL4 CO 85–100 W (TL6 CO 105–120 W (TL8 CO 20-50 W (fiber) 20-50 W (fiber) 20-50 W (fiber) Voltage 230 V~ 115 - 230 V~ 230 V~ 230 V~ Fuse...

  • Page 30: Exhaust System Requirements

    The requirements for the exhaust system and recommended Trotec exhaust systems for standard applications depend on the processing table installed in the machine. We recommend consulting with a qualified Trotec technician. RECOMMENDED EXHAUST SYSTEMS: Exhaust system Speedy 360 ✓...

  • Page 31: Materials List

    Machine Volume flow rate [m³/h] Pressure [Pa] Speedy 360 3500 The exhaust connection on the side of the machine is used as the measuring point for volume flow and pressure. Pressure losses through hoses or pipes or filters in the exhaust system must be determined and taken into account when selecting the exhaust system.
  • Page 32 Technical Data Cutting Engraving Marking Material Fiber Fiber Fiber ✓ coated metal (lacquered) ✓ ✓ Brass ✓ ✓ Copper ✓ ✓ Titanium Cutting Engraving Marking Material Fiber Fiber Fiber Plastics ✓ ✓ ✓ Acrylonitrile butadiene styrene copolymer (ABS) ✓ ✓ ✓...
  • Page 33 Notice Ask a Trotec Laser representative about the suitability of any materials that are not on the list to avoid any potential risks arising from a chemical reaction, and to preserve the warranty. For detailed information, please contact Trotec Laser Technical Support. Unless written approval is given, Trotec Laser accepts no liability and the warranty will be void.
  • Page 34 You have additions for further materials for us or in your opinion a material was not listed. We recommend performing a material processing test with the above mentioned material, using the appropriate configuration. Trotec Laser GmbH assumes no responsibility for any consequences of laser processing in any application, especially with medical or pharmaceutical applications.

  • Page 35: Machine Overview

    Machine overview Machine overview Anlagenübersicht Description Description Top lid Keypad Vision Design&Position Front door X-axis Laser head Emergency stop button Working table Key switch Ruby server status LED USB ports LED Interior lighting Touch display...
  • Page 36 Machine overview Description Description Connector for exhaust tube (working area) Type plate Cover for laser source Connector for exhaust tube (working table) Description Description I/O interface USB port for WiFi dongle Service plug connector Fuse Connector for exhaust tube Mains connection Main switch...

  • Page 37: Ruby Server Status Led

    Machine overview Ruby server status LED The Ruby server status LEDs are located on the le side above the LED interior lighting inside the laser machine. Description ❶ Green: power ❷ Yellow: activ ❸ Reset button...

  • Page 38: Front Door

    Machine overview Front door Loading and unloading of heavy and bulky parts or replacement of the table is very comfortable thanks to the front door that can be opened downwards. Notice Tables (multifunctional table concept) MULTIFUNCTIONAL BASE FRAME The multifunctional base frame is bolted to the mounting frame, which is attached to the Z-axis.
  • Page 39 Machine overview ALUMINUM CUTTING GRID TABLE The robust universal cutting table offers great stability and is especially suitable for cutting tasks with parts smaller than 100 mm, as they remain flat in position aer cutting. FERROMAGNETIC ENGRAVING TABLE The ferromagnetic construction allows thin materials, such as paper or film, to be easily attached with magnets.

  • Page 40: Lens(Es)

    Machine overview HONEYCOMB CUTTING TABLE The honeycomb cutting table is especially suitable for applications that require minimal back reflection and optimal flatness, such as when cutting membrane keyboards. Available in the following sizes: 12.7 mm nominal honeycomb size 6.4 mm nominal honeycomb size Lens(es) Fiber flexx...

  • Page 41: Nozzles

    Machine overview Fiber flexx 4.0'' blue Part No.: 90026 4.0'' CL violet Part No. 143502 Nozzles Ø 3 mm Short nozzle with small hole. Ø 7 mm Short nozzle with big hole.

  • Page 42: Transport

    Transport Transport Safety notes Warning Risk of injury There is risk of injury from falling parts during transport, loading and unloading of the machine. – Follow the safety notes. Observe the safety notes to avoid damage to the machine from improper handling during transport: Always move the machine with utmost care and attention.

  • Page 43: Temperature And Humidity

    Transport OBSERVE THE PACKAGING SYMBOLS: NOTE THE SHOCKWATCH SIGN: Temperature and humidity Transport conditions Transport temperature (ambiente temperature): -10 °C to +40 °C (14 °F to 104 °F) Relative humidity: Maximum 70%, non-condensing Avoid high temperature fluctuations. • Storage conditions Storage temperature (ambiente temperature): 0 °C to +30 °C (32 °F to 86 °F) Relative humidity:...

  • Page 44: Required Tools For Unloading And Transport

    Transport Required tools for unloading and transport REQUIRED TOOLS: Unloading - Forkli • Transport - Pallet truck • Place of storage Keep the machine sealed in its packaging until it is assembled or installed. • The storage location must be dry, free of dust, caustic materials, vapors and combustible materials. •...

  • Page 45: Relocation Of The Machine

    Transport Caution The lens unit should be unpacked only aer installation of the machine. The lenses are high-quality optical components which must be kept clean in order to ensure optimum marking results. Never touch the lenses with bare fingers. STEPS: 1.
  • Page 46 Transport Notice If you would like to relocate the machine, contact our experienced Technical Support in your local area.

  • Page 47: Setup And Installation

    Setup and installation Setup and installation For your safety Notice The setup has to be carried out by Technical Support. Temperature and humidity Ambiente conditions Operating temperature (ambiente temperature): +15 °C to +25 °C (59 °F to 77 °F) Relative humidity: 45% to 65%, non-condensing If the system has been exposed to large temperature fluctuations, it must first be brought back to room temperature •...

  • Page 48: Space Requirements

    Setup and installation Space requirements Ensure there is shielding or sufficient clearance to or from the wall and neighboring objects. Setup OBSERVE THE FOLLOWING STEPS: 1. Transport the machine to the installation location according to the specifications stated in the chapter “Transport”. 2.

  • Page 49: Connections

    Setup and installation Connections 6.5.1 Mains connection Connect the end of the mains cable to a fused socket. Warning Dangerous electrical voltage Wrong voltage can cause damage to the machine. Do not operate the machine, if the mains voltage does not match the voltage required by the exhaust system, as this may cause damage to the machine.

  • Page 50: Connection Of Additional Components

    Make sure that the mains voltage matches the voltage required by the exhaust system. Connecting: 1. When using an original Trotec exhaust system, also connect this, using the exhaust connection cable included, to the exhaust cable connection on the laser.

  • Page 51: Chiller

    Notice The conductivity of the water must not exceed 1000 μS. This value will not be reached if mixing the distilled water and additive accurately. A conductivity meter is available on request from Trotec Laser GmbH. Water replacement must be carried out once a year. Empty the cooling unit, clean it with distilled water, fill it with fresh distilled water and add new additives.

  • Page 52: Operation

    Operation Operation Warning Personal injury or damage to property due to improper operation. Improper operation can lead to serious personal injury or damage to property. – Work on the laser machine may only be carried out by authorized and instructed personnel familiar with the operation of the machine, observing all safety regulations.
  • Page 53 Operation SWITCH ON THE LASER: 1. Switch on the main power supply using the main switch on the back of the machine. The built-in Ruby server starts 2. Turn the key switch clockwise to the vertical position to activate the touch display.

  • Page 54: Control Panel

    Operation TO SWITCH OFF THE MACHINE: 1. Turn the key switch to the le. The touch display switches off, the axes are de-energized; the server remains active. 2. Switch off the main power supply to the machine by pressing the main switch on the rear of the machine.

  • Page 55: So Buttons On The Touch Display

    Operation ❶ Emergency stop button ❷ Key switch ❸ USB ports ❹ TouchDisplay ❺ So buttons ❻ Keypad ❼ RFID sensor So buttons on the touch display With the so buttons on the touch display you can: call up the jobs in the queue •...

  • Page 56: Keypad

    Operation Keypad ❶ Start/Pause/Repeat-button ❷ Stop-button ❸ Status indicator LED On: The machine is processing data. ❹ Laser head control button X/Y travel distance in X-direction • travel distance in Y-direction • ❺ RFID-Control display ❻ Working table control button Z Up-button •...
  • Page 57 Operation Start/Pause/Repeat-button Start: Press this button to start a job. • Pause: Press this button to pause the job which is currently being • processed. Press this button again to continue the job. • Repeat: Press this button aer a job was finished to repeat the actual •...
  • Page 58 Operation Working table control button Z Press one of these buttons to manually move the working • table up or down (travel distance in Z-direction). By simultaneous pressing of the Up-button + Down-button, • the activation of the automatic focusing starts and the working table is moving automatically upwards.

  • Page 59: Usb Ports

    Operation USB ports There are two USB ports on the control panel. Charge (max. 2A) = Charging port Data (500mA) = USB port (USB stick, HDD,..) Lense placement 1. Loosen lens by turning the clamping ring inwards. 2. Remove lens. 3.

  • Page 60: Focusing Methods

    Operation 5. Insert the lens with the lettering facing up, either above or below the clamping ring depending on the lens type. 6. Fixate the lens with the clamping ring. THE FOLLOWING LENSES MUST BE INSERTED BELOW THE CLAMPING RING: 1.5'' 2.0'' Notice...
  • Page 61 Operation Automatic focus modes Sonar Technology (automatic focusing with ultrasonic sensor) • Light bar focus • Caution If workpieces with more than 66.14 lbs (30 kg) have been placed on the table, the table must not be moved up or down anymore as this might damage the mechanics of the machine. It is mandatory to focus on the height of the material before loading material of 66.14 lbs (30 kg) and above.

  • Page 62: Sonar Technologie

    Operation 8.8.1 Sonar Technologie Caution If the ultrasonic sensor is heavily soiled, the laser head may be damaged if it therefore hits the material or the worktable. 1. Make sure that the ultrasonic sensor is cleaned. 2. Select the correct lens in the control soware settings. 3.

  • Page 63: Options

    Operation Options 8.9.1 Rotary engraving attachment The rotary engraving attachment is used for engraving cylindrical workpieces. Caution Damage to electronics. Inserting or removing the Rotary attachment while the machine is turned on may irreparably damage the electronics. Switch off the machine before inserting or removing the Rotary attachment. Device with cone: Device with rollers: Max.

  • Page 64: Installation And Commissioning

    Operation 3. Select the job from the list and place it in the marking field. 4. Start the engraving process. 8.9.3 Installation and commissioning 1. The machine must be switched off. Warning Dangerous electrical voltage If the rotary attachment is connected during operation, the connections and the electronics will be damaged.

  • Page 65: Gas-Kit Light

    Operation Levers for fixation of height and angle 3. Loosen the slider by using the lever in order to clamp the workpiece between the two cones or rolls. Slider inclusive lever 4. Switch on the laser. The axis automatically moves over the middle of the rotary attachment. 5.

  • Page 66: Temperature Sensor

    Operation 1. To adjust the air pressure, li the adjustment knob of the air pressure regulator and turn it until the air pressure display shows the desired value. 2. Lock the set pressure by pressing the adjustment knob downwards again. Notice Turn the regulator to a maximum of 0.4 MPa.

  • Page 67: Vision Design&Position

    Operation TEMPERATURE SENSOR ALARM ACKNOWLEDGEMENT Press any key on the keypad to acknowledge the alarm. Notice The signal tone sounds again and again until the temperature returns to normal. Alternatively, switch off the laser system and check the temperature sensors. 8.9.7 Vision Design&Position Camera-supported design and positioning directly on the workpiece live in Ruby®, regardless of whether the lid is closed...
  • Page 68 Operation LIVE IMAGE IN RUBY® Once the camera has been activated, you will receive a live image of the entire workspace. Ruby® allows you to work directly on the workpiece: set a text • design graphics • adjust an existing job. •...

  • Page 69: Screw Feet

    Operation 8.9.8 Screw feet The height-adjustable feet are available as an option. They compensate for unevenness and give the machine better stability.

  • Page 70: Maintenance

    Maintenance Maintenance Safety notes Danger Improper maintenance can cause serious injury or damage. Maintenance may be carried out only by authorized, trained personnel who are familiar with how to operate the machine and in strict observance of all safety notes. Danger Risk of fire or explosion.

  • Page 71: Maintenance Plan

    Maintenance Maintenance plan System Components Daily Weekly Half-yearly Yearly Chapter Checking the safety circuit "Daily inspection of the ✓ safety circuits" Lens, "Cleaning the mirrors" ✓✓ mirror #4 ✓✓ Mirror #2 and mirror #3 "Cleaning the mirrors" Ultrasonic sensor "Ultrasonic sensor (Sonar ✓✓...

  • Page 72: Change The Filter Mat

    Maintenance 2. Close the lid – The LED on the keyboard’s Start button should be flashing slowly (0.5 Hz) Check completed Checking the emergency stop button: 1. Press the emergency stop button – Interior lighting is switched off – LEDs on the membrane keyboard are switched off –...

  • Page 73: Cleaning

    7. Clean the safety lid with a dry or slightly damp cotton cloth. Do not use paper towels as these could scratch the acrylic. 9.6.2 Optics in general Trotec Laser GmbH recommends to use the cleaning set enclosed. Alternatively, use high-quality cotton swabs together with the provided cleaning liquid. Notice The following cleaning products are available as accessory parts: –...

  • Page 74: Lens

    Maintenance 9.6.3 Lens Warning Damage to optics. Soiled optics absorb laser radiation and can thus be destroyed. Broken or damaged lenses as well as thermal decomposition of lenses release particles which cause serious damage to the health. – The passive reflectors and optics in the area of the laser beam guidance should be cleaned regularly. –...

  • Page 75: Cleaning The Mirrors

    Maintenance Notice Trotec Laser GmbH recommends to use the following cleaning products, which are available as accessory parts: Lens cleaning cloth (part number 69249) and lens cleaning liquid (part number 69248). 9.6.4 Cleaning the mirrors Caution Make sure that you do not touch the mirror with your fingers, since this would greatly reduce the service life of the mirror.

  • Page 76: Ultrasonic Sensor (Sonar Technology Tm )

    Maintenance CLEANING THE MIRROR #4 1. While holding the mirror, loosen the two knurled screws (1) and li the mirror from the mirror holder. Caution Make sure that the mirror does not grind over the mirror holder, as it can be scratched very easily. 2.

  • Page 77: Troubleshooting

    Troubleshooting Troubleshooting This chapter should enable the maintenance personnel to identify and resolve operational faults based on error messages and symptoms. Warning Risk of fire from incorrect parameter settings. Laser operation with incorrect parameter settings such as power settings, speed or frequency can result in flame formation.
  • Page 78 Troubleshooting Problem Possible cause Remedy The size to be engraved or cut does Raster correction ON in the Switch off raster correction in • • not match the size in CorelDraw. soware. the soware (settings/advanced options/laser tab). Wrong size settings in the printer •...

  • Page 79: Contact Details

    Contact details Contact details TECHNICAL SUPPORT In case of questions, contact our experienced Technical Support in your local area. For global service contact numbers and further information please see our website, section "Support": www.troteclaser.com When you call, stay close to the machine and have the following information to hand (see "answer form"): At which working process did the problem occur?

  • Page 80: Disassembly

    Disassembly Disassembly Warning Danger of injury when disassembling the machine. There is danger of injury when disassembling the machine. Always wear suitable protective clothing (e.g. safety goggles, safety shoes, safety gloves). Warning Dangerous electrical voltage Electric current. The machine must be disconnected from the main power supply. Notice –...

  • Page 81: Disposal

    Disposal Disposal Disposal Do not dispose of the machine with domestic waste! Electronic devices have to be disposed of according to the regional directives on electronic and electric waste disposal. In case of further questions, please ask your supplier. In case of disassembly, use suitable tools to dismantle the unit into individual parts. Sort the individual parts and have them disposed of professionally.

  • Page 82: Appendix

    Appendix Appendix...
  • Page 83 Acceptance report Dear customer! We request your confirmation of properly completed transfer of the machine. Please transmit a copy of this document - filled out and signed by an authorized company representative - to an employee of our sales affiliate for forwarding to the manufacturer. Please check applicable items: Machine parts checked for shipping damage.
  • Page 84 Training verification form Trainee: Trainer: Date of Training: The employee named above was instructed in the operation of the ........laser system. Especially the following topics were covered: Machine function Danger areas Warnings Position of the Emergency stop button Personal protective equipment Operating equipment Workflow Setting-up...

  • Page 85: Antwortformular Ruby Sprachen Hinterlegt

    Response form Dear customer! In case of any trouble with the machine, please provide the following information and additional- ly create a service file. Contact details Machine data Name: Serial number: Country: Layout Software: Phone: E-mail: Date: Description of the problem Does an error message show up on the PC , and if so, which? What happened before the error occurred? (Thunder and lightning, Windows-Update...) What attempts were made to solve the problem?

  • Page 86: Acronyms

    Acronyms Acronyms Acronym Description Air cooled Alternating current Application programming interface Beam alignment tool Category Critical closed loop European Conformity Carbon dioxide Communication Central processing unit dB(A) A-weighted decibel Direct current DGUV Deutsche Gesetzliche Unfallversicherung (German Statutory Accident Insurance) DHCP Dynamic host configuration protocol Deutsches Institut für Normung (German Institute of Standardization) Domain name system...
  • Page 87 Acronyms Acronym Description Nominal width Original equipment manufacturer OPC UA Standard for data exchange as platform-independent, service-oriented architecture (Open platform communications) Pascal (printing unit) Personal computer Printed circuit board Personal identification number Random access memory RFID Radio frequency identification SONAR Sound navigation and ranging Time delay (slow release) Tensor processor...

  • Page 88: Datasheet 8085 Speedy 360 C

    Technical Datasheet - 8085 Speedy 360 Laser engraving system Mechanics Working area 813 x 508 mm (32 x 20 inch) Loading area standard 890 x 600 mm (35 x 23.6 inch) 210 mm (8.2 inch) with 1.5 inch, 2.0 inch lens 197,5 mm (7.7 inch) with 2.0 inch clearance lens, 2.5 inch lens...
  • Page 89 Technical Datasheet - 8085 Options Design and Position job in live view of work area on Ruby screen. Vision Design&Position Should the temperature inside the engraving compartment exceed a critical value, the system will signal this to the operator by a warning Temperature sensor sound.
  • Page 90 Technical Datasheet - 8085 Safety & environment Laser class CDRH laser class 2 Safety system with Individually checked Interlocks, optional with Dual- Interlock coded interlocks Mandatory ambient temperature +15° to +25° C or 59° to 77° F Ambient conditions Humidity 40% to max. 70%, not condensing Dust free environment (2nd degree according to IEC 60947-1) Certificates CE compliant, FDA listed...

This manual is also suitable for:

8085

Table of Contents