Table of Contents
Advertisement
Operation
8
Operation
Warning
Personal injury or damage to property due to improper operation.
Improper operation can lead to serious personal injury or damage to property.
–
Work on the laser machine may only be carried out by authorized and instructed personnel familiar
with the operation of the machine, observing all safety regulations.
8.1
Before commissioning
BEFORE COMMISSIONING, CHECK THE FOLLOWING POINTS:
With regard to completeness, and the technically perfect condition of the machine and safety equipment, see
•
chapter
"Daily inspection of the safety
Order and cleanliness in the workstation.
•
Cleanliness of optical components (free of dust and dirt).
•
Activated exhaust system.
•
Complete electrical installation.
•
Correct input voltage of the electrical installation.
•
Environmental conditions based on technical specification.
•
For compliance with all regulations and laser safety measures, see chapter "Safety".
•
Ensure compliance with all laser safety precautions as per chapter"Safety".
•
If any faults or functional deviations occur while checking the points listed, the machine is not considered to be safe to
operate and must not be used until the fault has been rectified!
If you have any questions, please contact our experienced technical support team in your area.
8.2
Power On/Off
Notice
In order not to restrict or obstruct the freedom of movement of the mechanics, no objects of any kind may
be located in the machining area.
All safety protection covers have to be fully functional and closed.
52
circuits".
Advertisement
Table of Contents
