TEMPERATURE SENSOR ALARM ACKNOWLEDGEMENT
Notice
The signal tone sounds again and again until the temperature returns to normal. Alternatively, switch off
the laser system and check the temperature sensors.
8.9.7
Vision Design&Position
Camera-supported design and positioning directly on the workpiece live in Ruby®, regardless of whether the lid is closed
or open. This permits a true representation of the laser job on the workpiece in the laser soware - "What You See Is
What You Get" (WYSIWYG). Vision Design&Position is therefore very suitable for small series, and residual materials can
be utilized more effectively and easily.
Press any key on the keypad to acknowledge the alarm.
Operation
67