Table of Contents
Advertisement
Safety
2.5
Safety devices
Warning
Danger from laser beam.
Personal injury and damage to property may occur if the safety devices and protection devices are not
fully functional.
–
Do not remove, modify or deactivate the interlock safety switches or protective covers on the
machine. Safety and protection devices must be fully functional at all times.
–
In case of assumed or presumed damage of safety devices, disconnect the machine from the mains.
–
Damaged safety and protection devices need to be replaced by a Trotec technician immediately.
2.6
Technical protective measures
2.6.1
Main switch
Pressing the main switch on the backside of the machine to disconnect the machine from the mains power supply.
2.6.2
Key switch
Turning the key switch to the "0" position de-energizes the motor, laser source, and electronics. It causes the machine
to instantly stop and the laser source to switch off. Operation of the machine by unauthorized persons can be prevented
by removing the key switch.
2.6.3
Emergency stop button
Pressing the emergency stop button instantly stops the machine and switches off the laser source.
The laser beam is interrupted and all movements are stopped.
RESET THE EMERGENCY STOP BUTTON
Notice
Eliminate the hazard before resetting the emergency stop button.
20
Advertisement
Table of Contents
