Table of Contents
Advertisement
Safety
SERVICE OPERATION
Service activities may only be carried out by authorized, trained service technicians. If side panels and covers are
removed and protective devices are bypassed, this can result in direct and indirect scattered radiation. Service
operation is declared to be laser class 4 and appropriate precautionary measures must be taken (see chapter
classes of this
machine").
2.1.6
Applicable safety regulations
The following guidelines and regulations must be observed to avoid risks when operating Trotec laser systems.
GUIDELINES/REGULATIONS
2006/42/EC
2014/30/EU
APPLIED HARMONIZED STANDARDS
EN ISO 11553-1:2020
EN ISO 12100:2010
EN ISO 13849-1:2018
EN 60204-1:2018
EN 60825-1:2022
EN 61000-3-2:2019
EN 61000-3-3: 2013 + A1:2019
EN 61000-6-2:2019
EN 61000-6-4:2019
OTHER APPLIED TECHNICAL STANDARDS
EN 60825-4:2012
14
EC Machinery Directive
EMC Guideline
Safety of Machinery – Laser Processing Machines - Part 1: General safety
requirements
Safety of Machinery – General Design Principles
Safety of Machinery – Safety-related Aspects of Control Systems, Part 1: General
design principles
Safety of Machinery – Electrical Equipment of Machines - Part 1: General
requirements
Safety of Laser Products – Part 1: Classification of equipment and requirements
Electromagnetic compatibility (EMC) – Part 3-2: Limit values for harmonic currents
Electromagnetic compatibility (EMC) – Part 3-3: Limit values for voltage changes /
flicker
Electromagnetic compatibility (EMC) – Part 6-2: Interference immunity for industrial
areas
Electromagnetic compatibility (EMC) – Part 6-4: Interference emission for industrial
areas
Safety of Laser Products – Part 4: Laser safety barriers
"Laser
Advertisement
Table of Contents
