Table of Contents
Advertisement
Exhaust system
Hose connector ø [mm]
(internal diameter)
Vent Set 500
100
REQUIREMENTS FOR THE EXHAUST SYSTEM:
Machine
Volume flow rate [m³/h]
Speedy 360
350
The exhaust connection on the side of the machine is used as the measuring point for volume flow and pressure.
Pressure losses through hoses or pipes or filters in the exhaust system must be determined and taken into account when
selecting the exhaust system.
A powerful exhaust system prevents a reduction in the service life of the lenses and mechanical components, the cutting
quality and the laser power acting on the workpiece caused by vapors and dust remaining in the machine.
Notice
The exhaust power available for the application will be reduced by e. g. bends, small hose diameters and
long hoses.
You should therefore note the following:
–
Avoid bends.
–
Keep hose as short as possible.
–
Use hose diameters as large as possible.
Applications generating large amounts of dust or fumes may require a stronger exhaust system. Use of
separate exhaust systems for head and table exhaust may also be necessary.
In this case it is absolute necessary to consult your distributor.
3.6
Materials list
Metals
Aluminum
Anodized aluminum
Chromium plated surfaces
Precious metals
Metal foils up to 0.5 mm (aluminum, brass, copper, precious metal)
Stainless steel
Material
Volume flow rate [m³/h]
max. 1200
Pressure [Pa]
3500
Cutting
CO
Fiber
2
✓
Technical Data
Pressure [Pa]
max. 7000
Engraving
Marking
CO
Fiber
CO
Fiber
2
2
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
31
Advertisement
Table of Contents
