Table of Contents
Advertisement
3.4
Requirements for the electrical connections of the machine
Laser power
Voltage
Fuse
Power consumption AC
(air-cooled) and LC (liquid-
cooled)
* T = time delay (slow release)
Caution
Inadequate or inappropriate power sources can lead to machine damage and are not covered by any
liability.
Verify that the electrical outlet is capable of providing the proper voltage, frequency and amperage
required by the laser machine described in this manual.
Caution
Unstable mains voltage, mains voltage disturbances and voltage peaks may interfere with and damage
the electronics of the laser machine.
Notice
Use an individual circuit for the laser machine and the PC and an individual circuit for the exhaust system.
Install your computer to the same circuit as the laser machine to prevent electromagnetic interactions.
Furthermore it is highly recommended that you use a overvoltage protection switch to protect your
computer equipment.
If electrical power fluctuations, brownouts or power outages are a problem in your area, an electrical line
stabilizer, UPS (Uninterruptible Power Supply) or backup generator are required. When installing any of
these devices, ensure that they meet the electrical requirements of the laser machine.
55–80 W (TL4 CO
)
2
20-50 W (fiber)
230 V~
115 - 230 V~
16A (T)*
1590 W
1590 W
85–100 W (TL6 CO
)
2
20-50 W (fiber)
230 V~
12A (T)*
2100 W
Technical Data
105–120 W (TL8 CO
)
2
20-50 W (fiber)
230 V~
12A (T)*
2100 W
29
Advertisement
Table of Contents
