Maintenance; Safety Notes; Service Life Of Safety-Relevant Components - Trotec Speedy 360 Operating Manual

Maintenance

9 Maintenance
9.1

Safety notes

Danger
Improper maintenance can cause serious injury or damage.
Maintenance may be carried out only by authorized, trained personnel who are familiar with how to
operate the machine and in strict observance of all safety notes.
Danger
Risk of fire or explosion.
Improper handling of the machine may cause fire or explosion.
–
For cleaning the machine, do not use explosive or flammable substances or cleaning agents.
– No flammable or explosive liquids may be stored in or near the machine.
– Always keep the system clean, and remove flammable parts from the working area or exhaust area.
Warning Dangerous electrical voltage
Danger of electrical shock.
Work on electrical fittings may be carried out only by qualified personnel and in strict observance of the
safety notes.
Before any maintenance work takes place, disconnect the machine from the mains voltage and make sure
the system is de-energized.
IMPORTANT NOTE ON MACHINE SAFETY:
Notice
The safety devices of the laser system must be replaced due to component aging or corresponding (e.g.
> 72,000 lid cycles / anno), the safety equipment of the laser system must be replaced by an authorized
technician aer 10 years at the latest, otherwise safety can no longer be guaranteed. Without measures,
the operating license will expire.
9.2

Service life of safety-relevant components

The safety-relevant components have a service life of ten years from the date of initial commissioning.
Notice
Aer ten years, an authorized technician must be contacted to check the safety-relevant components and
replace them if necessary (e.g. emergency stop, interlock sensors, cover, etc.).
Otherwise, safety is no longer guaranteed due to component ageing and/or frequent actuation.
The operating license expires if the safety-relevant components are not checked.
70