In Case Of Emergency - Trotec Speedy 360 Operating Manual

No. Description
1 Directed reflection: Reflected laser beam on a smooth surface.
2 Directed reflection: Reflected laser beam on an inclined surface.
3 Diffuse reflection: Reflected laser beam on a rough surface.
4 Directed reflection: Horizontally reflected laser beam on a smooth surface.
2.8

In case of emergency

WHAT TO DO IN THE EVENT OF A MALFUNCTION
In unusual operating conditions, open the lid to stop the machining process, press the emergency stop button, and
•
switch off the machine.
If necessary, disconnect the machine from the main power supply.
•
Inform the laser safety officer and your supervisor.
•
Repair work must only be carried out by Trotec Laser GmbH service technicians.
•
In the event of fire: Fight the fire with a CO
•
Notice
Aer a deletion, Trotec Technical Support must be involved before the system is put back into operation.
fire extinguisher if it is safe to do so.
2
Safety
25